Power & Canister Filter Replacement Parts

Marinelands C-Series O-Ring and Gasket kit contains all the replacement seals for the C-Series C-160 and C-220 Aquarium Canister Filters. Sound O-rings and gaskets are essential for maintaining proper seals and protecting your filter.

• Replacement O-ring and gasket kit for Marineland C-160 and C-220
• Contains all O-rings and gaskets
• Replace old parts to maintain proper seals and protect filter

The Aquatop Replacement Barrelhead O-Ring for CF400-UV provides a tight fit and a secure seal for your Aquatop CF400-UV Canister Filter. Maintain a complete seal is essential for efficient operation and leak prevention.

• Replacement O-ring for Aquatop CF400-UV Canister Filter
• Maintains seal and prevents leaks
• Genuine Aquatop replacement part

This Aquatop Replacement Impeller Assembly fits CF400-UV Canister Filters. The replacement assembly comes complete with impeller shaft, rubber grommets, fan blade, and magnet.

• Replacement impeller for Aquatop CF400-UV Canister Filter
• Includes shaft, rubber grommets, fan blade and magnet
• Genuine Aquatop replacement part

This Aquatop Replacement Impeller Assembly fits CF500-UV Canister Filters. The replacement assembly comes complete with impeller shaft, rubber grommets, fan blade, and magnet.

• Replacement impeller for Aquatop CF500-UV Canister Filter
• Includes shaft, rubber grommets, fan blade and magnet
• Genuine Aquatop replacement part

This Aquatop Replacement Quartz Sleeve Cover fits the CF400-UV Canister Filter. The quartz sleeve is a protective glass tube cover for the UV bulb. Each sleeve includes 2 seals.

• Replacement quartz sleeve for CF400-UV Filter
• Includes 2 seals for maximum protection
• Genuine Aquatop factory replacement part

API Rena Filstar XP kink free tubing is a high quality non kink silicone tubing which is 5 feet long and 0.75" diameter. This tubing is factory tubing that will replace tubing in your Rena XP1, XP2, XP3 or XP4.

• Factory replacement kink-free tubing
• Includes two 5' long replacement tubes
• Filstar XP Tubing is 3/4" diameter

The Impeller is the only moving part of the Aqua Clear filter. With proper maintenance it will rarely need to be replaced. The impeller is a white, 6 blade assembly with a magnet.

• Replacement Impeller for AquaClear 70 and 300 Power Filters
• Fits Replacement Motor Model # A16000 or A16400
• White, 6 blade assembly with a magnet

This genuine Marineland replacement sponge acts as an effective pre-filter for the Marineland Reverse Flow Power Head. The pre-filter traps large debris and other suspended objects before they can enter the power head, preventing clogging and potential damage.

• Genuine Marineland replacement part
• Pre-fiter sponge replacement for Reverse Flow Power Head
• Prevents large debris from clogging and damaging power head

Dimensions: 6"L x 2.5"W

The Marineland 3/4" Extension Tube fits several Marinelane filters, including the Penguin 125/170, Eclipse 1 (PFE1), and Magnum 350 aquarium power filters. Includes inlet strainer to prevent large objects from entering the filter.

• Marineland extension tube replacement
• Fits Penguin 125/170, Eclipse 1 (PFE1) and Magnum 350
• Includes strainer

Marineland Bio-Wheel Cover for Penguin 150B is a replacement bio wheel cover for the 150B power filter. This grey plastic rounded cover piece fits over your bio-wheel assembly preventing splashing all while giving a cleaner appearance.

• Replacement bio wheel cover for the 150B power filter
• Grey plastic rounded cover piece
• Fits over your bio-wheel assembly preventing splashing

Grey plastic filter box cover sold seperately

Marinelands Penguin 150B Impeller Housing is a replacement part for the 150B Power Filter. This part keeps the impeller and the "J" shaped black intake tube connected in line which allows the filters suction to function properly.

• Replacement part for the 150B Power Filter
• Keeps the impeller and the "J" shaped black intake tube connected in line
• Allows the filters suction to function properly

Ensure to check the rubber bushing on the ends of your impeller to make sure there is not too much wear and tear (damaged bushings can cause the filter to function improperly)

The Marineland Micron Filter for Penguin Rite-Size C fits in the Penguin Pro 275 & 375 and works to filter out both large and fine debris while improving your mechanical filtration. For use in freshwater or saltwater this micron polishing filter cartridge is best left overnight, leaving you with cleaner healthier water by morning.

• For overnight use
• Can be used in freshwater or saltwater aquariums
• Micron filter for better screening
• Fits the Penguin Pro 275 & 375 filter

Marinelands C-Series Replacement Tubing is made of tough, resilient vinyl that provides both strength and flexibility. It is a replacement part for Marineland C-Series (C-160 & C-220) Canister Filters.

• Made of strong vinyl tubing
• 5/8" ID x 6' Long
• Replacement tubing for C-160 & C-220 filters

Hagen Impeller Cover Fluval replacement part. Impeller Cover Replacement part for the Fluval 304-404 and 305-405 Filters made after July 2001.

• Replacement impeller cover for Hagen Fluval filters
• Fits Fluval models 304-404 and 305-405
• For models with straight impeller blades made after July 2001

NOTE: Please make sure your impeller has straight fan blades. (If your filter is older than July 2001 and/or has curved fan blades then you will need to purchase the OLD MODEL: Part Number A-20155)

This Fluval Edge Pre-Filter Sponge is specifically designed for your Fluval Edge Power Filter. Install on the filter the intake to collect fine debris, improving filter efficiency and keeping your aquarium cleaner. Also prevents small fish from becoming trapped by the filter suction.

• Pre-filter sponge for Edge Power Filter
• Traps small debris to keep filter efficient and aquarium cleaner
• Prevents small fish from being sucked into filter
• Easy to install on filter intake

This genuine Tetra replacement part is the complete Impeller Assembly for the Whisper Power Filter. Use to maintain continual efficient operation for Tetra Whisper Power Filter models 40, 2, 20-40 and 2000.

• Genuine Tetra replacement part
• Whisper Power Filter Replacement Impeller
• For Whisper 40, 2, 20-40 and 2000 Power Filters

Use with T3 Energizer (sold separately). Approximately 2.5" long.

Marinelands C-Series O-Ring and Gasket kit contains all the replacement seals for the C-Series C-160 and C-220 Aquarium Canister Filters. Sound O-rings and gaskets are essential for maintaining proper seals and protecting your filter.

• Replacement O-ring and gasket kit for Marineland C-160 and C-220
• Contains all O-rings and gaskets
• Replace old parts to maintain proper seals and protect filter

This Marineland Impeller Assembly is a genuine factory replacement part for the Emperor 400 Power Filter. Pack includes the complete impeller assembly and cover.

• Replacement impeller for Emperor 400
• Includes impeller assembly and cover
• Genuine Marineland replacement part

Cascade 1000 Canister Filter Motor Unit replacement part. Penn Plax Cascade 1000 Canister filter Motor Unit DOES match their manufacturer sku of CCF214.

• Replacement Cascade 1000 Canister Filter Motor Unit
• Cascade 1000 Replacement Motor only
• Does not include impeller - sold separately

NOTE: The impeller, and impeller housing are NOT INCLUDED! Make sure you put the impeller and impeller housing into the new motor when it arrives so that the motor can pump water into the filter. Or you may purchase them seperately.

Cascade 700 and 1000 Motor Unit Gasket replaces old, worn out or cracked motor gaskets in the Cascade 700 (CCF2UL) and 1000 (CCF3UL) aquarium canister filters.

• Cascade canister filter motor unit gasket replacement
• Fits Cascade 700 (CCF2UL) and 1000 (CCF3UL) canister filters
• Prevents costly damage to filter motor

This gasket only works for the Cascade 700 and 1000 model filters. Other models will require different gaskets.

Replacement Impeller O-ring for Penn Plax Cascade Canister Filters. This O-ring maintains a quality seal and protects the impeller from leaks and water damage. Fits Cascade models 700 and 1000.

• Replacement Impeller O-ring for Penn Plax Canister Filters
• Fits models Cascade 700 and Cascade 1000
• Maintains an effective seal to prevent damage to impeller

The Tetra Whisper Impeller Assembly replaces the impeller for the Whisper Power Filter PF60, 3, 4, Whisper Advanced PF30-60 and Triad 3000 filters. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Whisper PF60, 3, 4, Whisper Advanced PF30-60 and Triad 3000 power filters
• Full impeller assembly

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Hagen Fluval Canister Filter Motor Seal Ring is a replacement part for Fluval 305, 306, 405 and 406 canister filters. Replacing the seal ring is important to maintain a proper seal and prevent possible damage to the motor.

• Replacement motor seal ring for Fluval aquarium filters
• Fits Fluval 305, 306, 405 and 406 canister filters
• Maintains proper seal, prevents leaking and damage

The Cascade 1500 Impeller replaces the impeller for the Cascade 1500 canister filter. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Cascade 1500 canister filter
• Includes impeller, shaft and magnet

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Note: For the Cascade 1500 canister filter only. Cascade 1000 and 1200 models each require different impellers.

The Cascade 1200 and 1500 Motor Unit Gasket replaces old, worn out or cracked motor gaskets in the Cascade 1200 (CCF4UL) and 1500 (CCF5UL) aquarium canister filters.

• Cascade canister filter motor unit gasket replacement
• Fits Cascade 1200 (CCF4UL) and 1500 (CCF5UL) canister filters
• Prevents costly damage to filter motor

As gaskets get older, pressure and wear-and-tear cause them to lose their snugness. Replace misshapen gaskets to maintain a water-tight fit.

This gasket only works for the Cascade 1200 and 1500 model filters. Other models will require different gaskets.

Replacement Impeller for the Lifegard Aquatics Quiet One Pro Model Pump

• The Ceramic Shaft is NOT included.
• This Impeller is the replacement for both the pond & aquarium Quiet One Pro Model Pumps
• This part is for the Quiet One Pro Series Pumps only. It will NOT work with any of the Quiet One Original Series Pumps

Replacement Impeller for the Lifegard Aquatics Quiet One Pro

• Will not work with any of the the Quiet One Original Series Pumps.

Replacement impeller for Lifegard Aquatics Quiet One Pro

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.